Here is how PermSeal compares
to the “other” sealers on the market.
We are proud to make available to you the finest stone and masonry sealer in the world! PermSeal is the best sealer on the market today – proven time after time against all other competitors. PermSeal has passed the tough testing standards of the Tile Council of America and Alcoa Technical Center.
| OTHER SEALERS | PERMSEAL |
1. Water-based silicone product |
1. Petroleum based product-no silicones, acrylics or urethanes |
2. Minimum of 48 hours before installation of grout sealing |
2. Newly-grouted installations to Seal within 15 minutes, no need for return trips to finish |
3. Should not be used on ceramic tile |
3. Can be used on all ceramic tiles, glazed and unglazed |
4. Thoroughly remove all surface sealers and previous coatings before use |
4. Can be applied over other sealers and coatings |
5. Do not apply on any surface not recommended |
5. Apply to any surface including tiles, fabric, carpet, wood, glass, paint or aluminum |
6. Allow 2 hours drying time between coats |
6. Little or No dry time between coats |
7. Long drying time |
7. Very quick drying |
8. Use only on porous tile, natural stone and masonry surfaces |
8. Use on any type of surface |
9. 1-3 coats are necessary |
9. Only One coat is necessary |
10. Avoid overlapping, puddling and rundown |
10. No need to worry about this |
11. Wipe surface dry 3-5 minutes after application |
11. No wiping of the surface is necessary |
12. Do not dry product on tile or let it come in contact with any other non-recommended surface |
12. Dries invisible, No worries about other surfaces |