1. Water-based silicone product

1. Petroleum based product-no silicones, acrylics or urethanes

2. Minimum of 48 hours before installation of grout sealing

2. Newly-grouted installations to Seal within 15 minutes, no need for return trips to finish

3. Should not be used on ceramic tile

3. Can be used on all ceramic tiles, glazed and unglazed

4. Thoroughly remove all surface sealers and previous coatings before use

4. Can be applied over other sealers and coatings

5. Do not apply on any surface not recommended

5. Apply to any surface including tiles, fabric, carpet, wood, glass, paint or aluminum

6. Allow 2 hours drying time between coats

6. Little or No dry time between coats

7. Long drying time

7. Very quick drying

8. Use only on porous tile, natural stone and masonry surfaces

8. Use on any type of surface

9. 1-3 coats are necessary

9. Only One coat is necessary

10. Avoid overlapping, puddling and rundown

10. No need to worry about this

11. Wipe surface dry 3-5 minutes after application

11. No wiping of the surface is necessary

12. Do not dry product on tile or let it come in contact with any other non-recommended surface

12. Dries invisible, No worries about other surfaces